Volkswagen Golf - Specs of wheel sizes, tires, PCD, Offset and Rims for all model years (2023)

FAQs

What size wheels does a Volkswagen Golf have? ›

The 2021 Volkswagen Golf has tire sizes of P205/55HR16 and P225/40HR18. The 2021 Volkswagen Golf has wheel (rim) sizes of 16 X 6.5 and 18 X 7.5 inches.

The most common Volkswagen lug pattern is 5x4. 4 (5x112 in metric), though there is some variation between models.

How to fit 5x112 rims on 5x100 bolt pattern?? want to buy rims with a 5x112 pattern but apparently there is a way you can fit them? true? basically yes, can be done.

The 5x112 Bolt Pattern or Pitch Circle Diameter (PCD) is made up of the stud count (5) and the bolt circle measurement (112), the notional circle determined by the center position of the studs. The 5x112 bolt pattern is common to Aiways, Alfa Romeo, Audi, BMW, BMW Alpina, Bentley and Borgward vehicles.

Giving an example, a 5×112 to 5×110 wheel adapter will fit on vehicles whose bolt patterns are 5×112 and the wheels with 5×110 lug patterns. They become the extensions of the vehicle hubs which convert the bolt patterns. So, you can mount a variety of wheels, regardless of the bolt patterns.

What bolt pattern is a 2000 VW Golf? ›

The 2000 Volkswagen Golf GLS bolt pattern is 5-100 mm. This means there are 5 lugs and the diameter of the circle that the lugs make up measures 100 mm or 3.94 inches across.

Wheel offset is simply the distance between the wheel's hub-mounting surface and its center plane. Positive offset means the hub-mounting surface is closer to the wheel's outboard side. Conversely, negative offset means it's closer to the inboard side.

Luckily, you can get an interchangeable rim from any vehicle. You only have to ensure the old wheel's bolt patterns, wheel size, and wheel offset is the same as the new one. You can either find the right size of the new wheel by checking the sticker label on the inside driver's door or by measuring the rim.

How To Measure Wheel Size and Fitment Diameter Offset ... - YouTube

The two easiest ways are to check the sticker plate in your car, it should be located inside the driver side door, or look online for the vehicle specifications for your exact make and model. That should tell you the standard rim size.

The 2001 Volkswagen Golf GL bolt pattern is 5-100 mm. This means there are 5 lugs and the diameter of the circle that the lugs make up measures 100 mm or 3.94 inches across.

What are Wobble Bolts? The correct term is PCD Variation Bolts. This type of bolt has a unique rotating washer collar that sits beneath the hex and above the threaded stud. The 60° tapered collar is able to move 2.3mm in any given direction.

Most BMWs have a lug pattern of 5x4. 41 or 5x4.

Common vehicles that have a 5×120 bolt pattern include Acura, BMW, Buick, Cadillac, Chevrolet, GMC, Honda, Land Rover, Lexus, Pontiac, Tesla, Volkswagon. What is this? Use the following table to see a list of vehicles with a 5×120 bolt pattern.

The most popular cars with PCD 5x114,3 are: Honda Civic oraz Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee'd, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3.

Will a 5x120 fit a 5x112? ›

These 5x120 to 5x112 PCD adapters are designed to change your PCD from 5x120 to 5x112 , and simply fit on to your vehicle's existing wheel hub. These PCD hub adapters are 45mm in thickness, feature an M14x1. 5 thread type and will convert your vehicle's centre bore from 72.5mm to 57.1mm.

They are both the same, just one is measured in inches and the other is in mm. If you saw an auction for a set of wheels that are 5x100/5x114. 3 this most likely means the wheels will fit both bolt patterns and have 10 lug holes around the center bore of the wheel to allow fitment of both bolt patterns.

Front & Rear: 18x9” ET42

The best track setup option for those running aftermarket BBKs with rotor sizes that require 18" or larger wheels.

How to Read a Tire Size & Understanding a Tire Sidewall

Offset is usually stamped or engraved into the wheel and is measured in millimetres of 'ET' [ET is the short form of the German word 'Einpresstiefe' which literally translates as 'insertion depth'] Positive Offset wheels have their mounting face toward the front face of the wheel.

Early BMW 3 Series models including the E21 and E30 used a 4x100 PCD, while later models switched to a 5x120 PCD which has now become ubiquitous across the BMW range and is popularly referred to as 'BMW fitment'.

All generations of the Honda Accord have a bolt pattern of 5×4.5 inches (5×114.3mm), a center bore of 2.52 inches (64.1mm), and five lug nuts with a thread size of M12 x 1.5 that need to be tightened with 79.6lb-ft (108Nm) of force.

What lug pattern is a Ford Focus? ›

The Ford Focus ST uses a 5x108 bolt pattern with wheel diameters usually ranging from 16 to 20 inches, widths from 7 to 9.5 inches, and offsets from +15mm to +55mm.

How to measure your Wheel Offset / ET accurately - YouTube

Calculate the offset.

Then, subtract that number from the backspacing. For example, if the width I'd measured is 8 inches, my wheel centerline should be at 4 inches. Then, if my backspacing is 6 inches, 6 inches minus 4 inches is 2 inches. The offset is 2 inches, or about 50 millimeters.

+40 offset means that the mounting point of your wheel is 40 mm away from the centerline, towards the street side. Most vehicles come with a factory offset of about +12 to +20. In this case, assuming that your original offset was zero, if you switch to a +40 offset rim, your wheel will be tucked in by 40 mm.

5-lug patterns consist of the following: 5×98, 5×100, 5×108, 5×110, 5×112, 5×114.3, 5×115, 5×120, 5×120.7, 5×127, 5×130, 5×135, 5×139.7, 5×150, 5×155, 5×165.1 and 5×205. 6-lug bolt patterns are manufactured for mid-size SUVs, full-size SUVs and trucks.

The Pontiac G6, Chrysler 200, Chevy Cobalt and Malibu and the Jeep Cherokee are pretty common examples of vehicles that use the 5x110 bolt pattern.

But you might not know what wheels from other vehicles will fit your car. Fortunately, it's possible to use a replacement wheel from any vehicle. However, you should ensure that that the original wheel has the same bolt pattern, wheel offset, and size of the new one.

The wheels width is usually written beside the flange shape marking – e.g: 7j, 7.5j, 8.0j. The width of the wheel is basically the area shown on the photo above and it is measured in inches. In other words, the bigger the number, the “thicker” your wheels are.

HOW TO: Measure 5-Lug wheel bolt pattern - YouTube

How is VW bolt pattern measured? ›

Measure from back of one hole across pattern to center of second hole. Always check your bolt pattern before placing an order to ensure 5X205 wheels will fit your car.

You will see a series of letters and numbers that will look like this for example: 205/55R16. This will confirm the size of the tires on your vehicle. Make sure all 4 tires read the same size, as some vehicles come with staggered fitments which means the front and rear wheels and tires can be different sizes.

How to know which tires will fit your car - YouTube

No, there is no such thing as a universal wheel. Numerous factors come into play when deciding what wheels can go on your vehicle. Two of the most critical factors are the wheel's diameter and width. Every car will have a range of wheel diameter sizes of several inches that will securely and adequately fit.

Front & Rear: 18x9” ET42

The best track setup option for those running aftermarket BBKs with rotor sizes that require 18" or larger wheels.

The 2000 Volkswagen Golf GLS bolt pattern is 5-100 mm. This means there are 5 lugs and the diameter of the circle that the lugs make up measures 100 mm or 3.94 inches across.

What PCD is mk1 Golf? ›

They are both the same, just one is measured in inches and the other is in mm. If you saw an auction for a set of wheels that are 5x100/5x114. 3 this most likely means the wheels will fit both bolt patterns and have 10 lug holes around the center bore of the wheel to allow fitment of both bolt patterns.

The most popular cars with PCD 5x114,3 are: Honda Civic oraz Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee'd, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3.

Common vehicles that have a 5×120 bolt pattern include Acura, BMW, Buick, Cadillac, Chevrolet, GMC, Honda, Land Rover, Lexus, Pontiac, Tesla, Volkswagon. What is this? Use the following table to see a list of vehicles with a 5×120 bolt pattern.

All generations of the Honda Accord have a bolt pattern of 5×4.5 inches (5×114.3mm), a center bore of 2.52 inches (64.1mm), and five lug nuts with a thread size of M12 x 1.5 that need to be tightened with 79.6lb-ft (108Nm) of force.

The Ford Focus ST uses a 5x108 bolt pattern with wheel diameters usually ranging from 16 to 20 inches, widths from 7 to 9.5 inches, and offsets from +15mm to +55mm.

Wheel offset is simply the distance between the wheel's hub-mounting surface and its center plane. Positive offset means the hub-mounting surface is closer to the wheel's outboard side. Conversely, negative offset means it's closer to the inboard side.

19 inch wheels set Cadiz 5-spoke VW Golf VII 7 R Original Volkswagen.

19 x 8 "Pretoria" wheel (Grey Metallic)